📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

switch.homeseer_238, Domain 'switch', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

switch.homeseer_78, Domain 'switch', state 'on'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

switch.homeseer_494, Domain 'switch', state 'on'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

switch.homeseer_496, Domain 'switch', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

switch.homeseer_474, Domain 'switch', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

switch.homeseer_292, Domain 'switch', state 'on'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

switch.homeseer_291, Domain 'switch', state 'on'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

switch.homeseer_538, Domain 'switch', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

switch.homeseer_539, Domain 'switch', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

switch.homeseer_658, Domain 'switch', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

switch.homeseer_290, Domain 'switch', state 'on'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

switch.homeseer_1379, Domain 'switch', state 'on'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

switch.homeseer_742, Domain 'switch', state 'on'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

button.homeseer_2694_115, Domain 'button', state '2026-07-27T20:02:22.777914+00:00'
button.homeseer_2694_117, Domain 'button', state '2026-07-27T11:28:28.246357+00:00'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

switch.homeseer_2321, Domain 'switch', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

switch.homeseer_2031, Domain 'switch', state 'on'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

switch.homeseer_3082, Domain 'switch', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

switch.homeseer_2844, Domain 'switch', state 'on'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

switch.homeseer_2319, Domain 'switch', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

switch.homeseer_33, Domain 'switch', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

switch.homeseer_2047, Domain 'switch', state 'on'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

switch.homeseer_1517, Domain 'switch', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

button.homeseer_2743_115, Domain 'button', state '2026-07-27T21:38:35.600682+00:00'
button.homeseer_2743_117, Domain 'button', state '2026-07-28T07:42:01.432411+00:00'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

switch.homeseer_1995, Domain 'switch', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

switch.homeseer_80, Domain 'switch', state 'on'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

switch.homeseer_322, Domain 'switch', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

input_select.homeseer_2335, Domain 'input_select', state 'Open'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

input_boolean.homeseer_3134, Domain 'input_boolean', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

input_boolean.homeseer_293, Domain 'input_boolean', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

input_boolean.homeseer_2332, Domain 'input_boolean', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

input_boolean.homeseer_2330, Domain 'input_boolean', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

input_boolean.homeseer_1206, Domain 'input_boolean', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

input_boolean.homeseer_2039, Domain 'input_boolean', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

input_boolean.homeseer_1004, Domain 'input_boolean', state 'on'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

input_boolean.homeseer_40, Domain 'input_boolean', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

input_boolean.homeseer_372, Domain 'input_boolean', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

input_boolean.homeseer_2215, Domain 'input_boolean', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

input_boolean.homeseer_2888, Domain 'input_boolean', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

input_boolean.homeseer_2285, Domain 'input_boolean', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

input_boolean.homeseer_2283, Domain 'input_boolean', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

input_boolean.homeseer_2281, Domain 'input_boolean', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

input_boolean.homeseer_1521, Domain 'input_boolean', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

input_boolean.homeseer_1816, Domain 'input_boolean', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

input_boolean.homeseer_2279, Domain 'input_boolean', state 'off'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

input_number.homeseer_325, Domain 'input_number', state '2.0'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

input_number.homeseer_1961, Domain 'input_number', state '0.0'

📌 AKHomeAssistant Support in Forum

👉 No 'Save' is required for adding/dleting Entities

To create HA entity select the toggle. To delete - unselect.

👉 Enable HomeAssistant => HomeSeer to apply HA changes in HomeSeer.
Select Status only to update the HS value/string without sending a control command.

👉 Two directional control HA <=> HS is fun, but may cause issues, consider carefully

input_number.homeseer_295, Domain 'input_number', state '0.0'

📌 AKHomeAssistant Support in Forum

More Details here

👉 Zeroconf/mDNS discovery (_home-assistant._tcp) []

👉 MyHS Access Token (Not needed for AKHomeAssistant)

Step 1 - Login to MyHS to get the PIN, then copy the PIN to the field below

Click the below URL to start MyHS Authorisation

Login to MyHS

Step 2 - Copy the PIN received in Step 1

Step 3 - If the above PIN is correct - the Access Token will be obtained automatically

📌 AKHomeAssistant Support in Forum

Home

🧾 Home Entities